TINY Óxido de alumínio microjateadores de areia microblaster 4 buracos

TINY Aluminium Oxide Microblaster Microetcher Air Abrasion System Dental Polisher Sandblaster 4 Hole

Features:

1.Easy to use, quick and light in appearance

2.This product can link with global 4 or 6 hole teeth chair.

3.Product use for：to increase viscosity of the touch surface , roughening the surface of compound material metal ,porcelain crow,fiber post,inlay surface.

Specifications:

1.Link way:4 or 6 hole teeth chair general autoclavable.

2.Opertion air pressure:0.3Mpa-0.4Mpa

3.Sand amount:1.5g/min-3.59g/min

4.Blasting hole:Φ0．5mm

5.Blasting head can rotate to 360°

Caution: You must check if there is remaining water in the handpiece cable before installation. If there is, you must dry it firstly, then install it.

Recommended powder

We recommend a particle size of 30 to 50 μm high purity powder (99%+).

It's easy for the powder to absorb moisture from the air , It would cause agglomeration, resulting in performance degradation. After install the powder, you should closed the cover of the bottle immediately to make sure its tight cover.

The dry powder should flow freely, the wet powder does not flow easily or lumps.

Extraoral application

For surface cleaning and micro-roughening treatment before pasting metal/Porcelain

Fiber post

Inlay/Onlays

Maryland bridge

Orthodontic bracket

Removing the cement in the original adhesive layer before second pasting

Cast metal prosthesis defect detection

Application in oral

In the repair treatment, micro roughen surface of porcelain or composite.

Package Included:

1*Handpiece

1*powder jar

1*Steel Needle

1*mini wrench